Titan Focus 700 Manual De Instrucciones página 22

GB
exPlanatory dIagram/ Plug 'n' sPray system
2
eXPlAnAtorY dIAgrAm (fIg. 1)
Pos. desIgnatIon
1 Nozzle
2 Air cap
3 Spray jet width adjusting lever (shaping air)
4 Spray jet level adjusting ring (vertical/horizontal)
5 Union nut
6 Spray attachment complete
7 Material volume regulation
8 Gun handle
9 Air volume control
10 Air hose
11 PLUG 'N' SPRAY catch
12 Trigger (actuates turbine starting switch  material is
conveyed)
13 Container
14 Suction tube
3
the tItAn Plug 'n' SPrAY SYStem
With the Titan PLUG 'N' SPRAY System, the front part of the gun (spray attachment) can be replaced quickly and easily.
This enables a rapid material change without cleaning, and ensures that the right tool is available for every material and applica-
tion.
The following spray attachments are available:
Spray attachment
MultiFinish (red)
Order No. 2335 658
FineFinish (brown)
Order No. 2335 657
WallFinish (white)
Order No. 2335 659
3.1 dISASSemBlY of the SPrAY gun
For assembly, insert the spray attachment into the gun handle so that the two arrows point at each other. Turn the gun handle
90° in the arrow direction until it audibly engages. (Fig. 2)
To remove the spray attachment, push the catch (Fig. 2, A) beneath the trigger down and turn the spray attachment by 90°.
16
Area of application
Spray attachment with slit nozzle and 1000 ml stainless steel container. Processes all standard
paints.
Spray attachment with round nozzle and 1000 ml stainless steel container. Ideal for low-viscosity
paints and glazes.
Dispersion spray attachment with slit nozzle and 1400 ml plastic container. Designed for processing
dispersions.
Pos. desIgnatIon
15 Container seal
16 Valve
17 Ventilating hose
18 Carry handle
19 ON/OFF switch (I = ON, 0 = OFF)
20 Gun mounting for park position
21 Air filter cover
22 Air filter
23 Power cable
24 Air hose connection
25 Cleaning brush
26 Fine feed tube filter (red)
Coarse feed tube filter (white)
27 Funnel (3 pcs.)
28 Air hose fixing straps (2 pcs.)
Focus 700