Bluetooth ® Playback; Playing Back - Onkyo TX-NR474 Manual De Instrucciones

> Before Start > Part Names
®
BLUETOOTH
1
You can wirelessly play music on a
smartphone or other BLUETOOTH
wireless technology enabled device.
Perform the following procedure when the
unit is on.
Pairing
1. When you press the button, "Now
Pairing..." is displayed on this unit's
display, and the pairing mode is enabled.
2. Enable (turn on) the BLUETOOTH
function of the BLUETOOTH wireless
technology enabled device, then select
this unit from amongst the devices
displayed. If a password is requested,
enter "0000".
0 This unit is displayed as "Onkyo TX-
NR474 XXXXXX".
0 To connect another BLUETOOTH
wireless technology enabled device,
> Install
Playback
2
Onkyo TX-NR474 XXX
press and hold until "Now
Pairing..." is displayed, then perform
step 2. This unit can store the data of
up to eight paired devices.
0 The coverage area is 48y/15 meters.
Note that connection is not always
guaranteed with all BLUETOOTH
wireless technology enabled devices.

Playing Back

1. Perform the connection procedure on
the BLUETOOTH wireless technology
enabled device.
The input on this unit automatically
switches to "BLUETOOTH".
2. Play the music files. Increase the volume
of the BLUETOOTH wireless technology
enabled device to an appropriate level.
0 Due to the characteristics of
BLUETOOTH wireless technology, the
sound produced on this unit may slightly
be behind the sound played on the
BLUETOOTH wireless technology
enabled device.
> Initial Setup > Playback
3
Advanced Setup | Supplementary Information | Others
23
En