Install; Installation Procedure - Onkyo TX-NR474 Manual De Instrucciones

> Before Start > Part Names

Installation procedure

Install

1
2
8
> Install > Initial Setup
3
> Playback
Advanced Setup | Supplementary Information | Others
This unit can be used in a number of ways, depending on
the layout of the speakers you are installing, and the
connections made to external devices. Read the following
to help make the installation process smoother.
Step1: Speaker Layout
Select the speaker layout that suits the types of speakers
you have and the conditions they will be used in from the
choices presented on pages P9 to P12, then install the
speakers by referring to the illustrations and explanations
on the relevant page. Speaker layouts include systems that
use surround speakers and systems that use height
speakers. Also refer to the combinations available in
"Speaker combinations" on P13.
Step2: Connect the Speakers
Connect the speaker system to this unit. The connection
process will be smoother if you refer to the illustrations and
explanations and prepare the required cables before hand.
Step3: Connect the TV & AV Components
Refer to P15 to P19 to connect your external devices such
as your TV, Blu-Ray Disc Player, and also supplied
accessories such as the antennas. The connection process
will be smoother if you refer to the illustrations and
explanations, confirm the connection types on the external
devices, and prepare the required cables before hand.