Music Server - Onkyo TX-NR474 Manual De Instrucciones

> Before Start > Part Names

Music Server

1
INPUT
It is possible to stream music files stored
on PCs or NAS devices connected to the
same network as this unit.
0 The network servers compatible with the
Music Server feature are those PCs with
players installed that have the server
®
functionality of Windows Media
11 or 12, or NAS that are compatible
with home network functionality. Note
that with PCs, only music files registered
in the library of Windows Media
can be played.
0 You may need to make some settings on
the PC in advance to use Windows
®
Media Player 11 or 12 with the Music
Server feature.
32
> Install
2
®
∫ Windows Media
settings
®
On Windows Media
1. Turn on your PC and start Windows
®
Media Player 11.
Player
2. In the "Library" menu, select "Media
Sharing" to display a dialog box.
3. Select the "Share my media" check box,
and then click "OK" to display the
®
Player
compatible devices.
4. Select this unit, click "Allow" and put a
check mark next to the icon for this unit.
5. Click "OK" to close the dialog.
0 Depending of the version of Windows
®
Media Player, there may be differences
in the names of items you can select.
®
On Windows Media
1. Turn on your PC and start Windows
®
Media Player 12.
2. In the "Stream" menu, select "Turn on
media streaming" to display a dialog
box.
> Initial Setup > Playback
3
Player
0 If media streaming is already turned on,
select "More streaming options..." in the
"Stream" menu to list players in the
Player 11 network, and then go to step 4.
3. Click "Turn on media streaming" to list
players in the network.
4. Select this unit in "Media streaming
options" and check that it is set to
"Allow".
5. Click "OK" to close the dialog.
0 Depending of the version of Windows
®
Media Player, there may be differences
in the names of items you can select.
Player 12
Advanced Setup | Supplementary Information | Others
∫ Playing Back
Before performing the operations below,
start the server (Windows Media
®
11, Windows Media Player 12, or NAS
device) containing the music files to play,
and make sure that the PCs and/or NASs
are properly connected to the same
network as this unit.
Perform the following procedure when the
unit is on.
1. Switch the input on the TV to that
assigned to the unit.
2. Press NET (a) on the remote controller
to display a list of Network Functions on
the TV.
3. Select "Music Server" with the cursors of
the remote controller and press ENTER
(b) to confirm your selection.
4. Select the target server with the cursors
on the remote controller and press
ENTER to display the items list screen.
5. With the cursors on the remote
controller, select the music file to play,
®
Player