Publicidad
Step 22
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D12 and D13).
å
Fasten the DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D12)
and the DRAWER LEFT (35AD) to the LEFT DRAWER SIDE (D13). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
å
NOTE: The screw head in the CAM must be visible through the slotted
hole in the SLIDE.
å
NOTE: The glides are not intended to rotate.
2
www.sauder.com/service
Glide end
1
D13
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
10A
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D12
3S
423392
6
10A
Glide end
1
2
Drawer Slide
Center the screw in the oval hole.
Page 27
Publicidad
