EUFY RoboVac Manual Del Propietário página 11

English
3. Single Room cleaning
RoboVac intensively cleans one single room and stops after 30 minutes. Select this mode
only when one specific room needs to be cleaned. Make sure to confine RoboVac to the
room by closing the door.
Press on the remote control to start cleaning in Single Room Mode.
4. Manual cleaning
You can direct RoboVac to clean a particular area by using the directional buttons on the
remote control.
18
Move forward
Turn left
Turn right
Move backward
Set Time and Scheduled Cleaning
Set Time
Make sure the time is set correctly to your local time before setting a scheduled cleaning.
Make sure the main power switch on the bottom of RoboVac is turned on.
Press on the remote control. The time will blink on the display.
Press to set the "hour" and "minute".
Note: Make sure AM/PM is set correctly.
Press or to save the setting. RoboVac will BEEP ONCE to indicate the time has
been set.
To ensure the time is set successfully, make sure RoboVac is turned on. You will hear
a beep when the time has been set.
Set a Scheduled Cleaning
You can schedule RoboVac to start cleaning at a specified time.
Note: Before setting a scheduled cleaning, make sure the time has been set correctly to
your local time; refer to the previous section "Set Time" for how to set the time.
Make sure the main power switch on the bottom of RoboVac is turned on.
Press on the remote control. will blink on the display.
Press to set the "hour" and "minute".
Note: Make sure AM/PM is set correctly.
English
ON
19