Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
A Removable grill plates
B Ready LED indicator
C On LED indicator
BEFORE USE
• Before using for the first time, thoroughly clean the plates with warm
water and a little washing up liquid, rinse and dry thoroughly (fig 2).
• The grill is made up of two independent removable plates (A) that can
be used either separately or together. When you install the plates, make
sure that they are positioned correctly. It is necessary that both plates
are installed on the appliance, even if you only intend to use one (fig 3).
• Make sure the drip tray (E) is in position (fig 4).
PREHEATING
• Unwind the cord completely (fig 5).
• Do not touch the metal parts of the appliance while it is preheating or
being used because they are very hot.
• Make sure the thermostat controls (D) are at the minimum position and
then plug into a wall outlet.
• The ON lights (C) will turn on and remain on to indicate that the cord is
plugged in (fig 6).
• Preheat the grill(s) by adjusting the thermostat controller(s) to the
desired position then wait until the READY LED (B) indicator lights turn-
on (fig 7 & 8).
Note: You can set each thermostat at different temperatures if needed
depending on what you are cooking.
• You are now ready to start cooking, place your food on the cooking
plates (fig 9 & 10).
• The READY LED indicator will intermittently turn on and off while the
appliance is in use to indicate that the temperature is being maintained.
D Thermostat control dials
E Drip tray
EN
15
Publicidad
