Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
3.2. Adjusting the Feet
If the product stands unbalanced after
installation, adjust the feet on the front
by rotating them to the right or left.
The condenser of your appliance is located on the back as shown below. In order
to achieve better energy efficiency with lower energy consumption, please pull
the condenser towards yourself as illustrated in picture below.
*may not be available in all models
Refrigerator/User Manual
All manuals and user guides at all-guides.com
2-b
initial position
3.3. Electrical Connection
WARNING: Do not make
A
connections via extension
cables or multi-plugs.
WARNING: Damaged
B
power cable must be
replaced by the Authorized
Service Agent.
If two coolers are to be
installed side by side, there
C
should be at least 4 cm
distance between them.
Our company shall not be liable
for any damages that will arise
when the product is used without
grounding and electrical connection
in accordance with the national
regulations.
Power cable plug must be within easy
reach after installation.
Do not extension cords or cordless
multiple outlets between your
product and the wall outlet.
11 / 26 EN
PULL
PULL
better energy
efficiency
Publicidad
