Operating Instructions; Taking Into Operation - Truma SecuMotion Instrucciones De Uso

Operating instructions

The use of upright gas cylinders
from which gas is taken in the
gas phase is mandatory for the
operation of gas regulators, gas
equipment and gas systems.
Gas cylinders from which gas
is taken in the liquid phase (e.g.
for fork lifts) must not be used,
since they would result in dam-
age to the gas system.

Taking into operation

Open gas remote switch if
present.
2.
1.
3 sec
1. Open the cylinder's valve.
2. Firmly press the green reset
button on the high pressure hose.
3. Press gas flow monitor reset
button (green button) on gas
pressure regulator slowly
4. Release gas flow monitor
reset button (green button) on
gas pressure regulator slowly
(3 seconds).
If no pressure point is felt when
the button is pressed again, the
regulator is ready for operation
(repeat procedure if necessary).
Start the gas-burning devices if
desired.
3.
If the gas cylinders are closed,
SecuMotion may switch off after
4.
an extended period of no usage.
Changing a gas cylinder
Please use the included screwing
tool to attach and remove the high
pressure hoses. It will help you
generate the necessary tightening
torque and will prevent damage
to the screw fittings, which may
otherwise result from using an
.
improper tool.
11