Technical Data - Truma SecuMotion Instrucciones De Uso

Technical data

measured according to
EN 12864 or under Truma test
conditions
Gas type
Liquid gas (propane / butane)
Inlet pressure p1
0.3 – 16 bar
Outlet pressure p2
30 mbar
Flow rate Qn
See printing on the regulator
Gas-flow monitor's switch-off
point
27 mbar or 125 % Qn
Regulator inlet
Male threads M20 x 1.5 (G.13)
Regulator outlet
Cutting-ring screw fitting
8 or 10 mm
Recommended tightening
torque
3 – 5 Nm for nut M20 x 1.5 (G.13)
Declaration of conformity
The Truma SecuMotion gas-
pressure regulator complies with
the pressure-device directive
97/23/EC under application of
EN 12864/D and the directive
2004/78/EC exhibit VIII "Safety
Requirements for LPG-Operated
Combustion Heating Devices".
Product Identification
Number
CE-0085BQ0102
The right to effect technical
modifications is reserved!
17