Publicidad
Idiomas disponibles
Idiomas disponibles
To setup the system time
1
Select one of the NTP server addresses
of the <Address> list, or click
<Syncronize with PC Viewer>.
2
Set the date and time directly if you
select <Manual>.
3
Click the [Apply] button.
The setting time is applied.
NTP Server IPs are provided by a public agency and their list is therefore subject to change.
In a local network, a separate NTP server must be manually defined.
The current time can vary depending on the computers regional (GMT and DST) and country
(PC time configuration) settings.
To view the log information
Click <SYSTEM> <LOG>.
The Log window appears showing log
information.
<System Log List>: Shows the log information about the system changes along with time and IP
- <User Log In>: Shows current camera login user.
- <Video Configuration Change>: Shows video setting changes.
- <System Time Change>: Shows time changes.
- <System Start>: Shows time when the camera is turned on.
Up to 2000 logs can be recorded.
If the log number is over 2000, a log in the bottom of log list will be deleted and added new
log information.
64_
Setting Up
address.
Publicidad
