setting dynamic ip
dyNAMIC IP SETTING
Examples of using dynamic IP
If the camera is installed on an IP router and obtains an IP using DHCP
If the camera is connected directly to a xDSL/Cable modem using DHCP
If an IP is allocated by the internal DHCP server in local area networking
dynamic IP Check
1
When you run the IP Installer on your local PC, the camera with a dynamic IP allocated is
listed.
2
Select the camera in the list and click the [Manual Set] button to check the camera for
the current dynamic IP.
In this case, the ADDRESS field is automatically filled and you can't change it.
However, you can still change the port settings.
40_
Setting Dynamic IP
1
2