Descargar Imprimir esta página

Altrad Belle RTX 50 Manual Del Operador página 25

Ocultar thumbs Ver también para RTX 50:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
Every 8 Hours or Daily
to the engine manufacturer's recommendations. If operating
should be done more frequently.
3. Check oil level in crankcase of engine and replenish as necessary.
Check oil level in the ramming cylinder as per following procedures.
3a. Make sure that the machine has not been run in the last 10
minutes.
3b. Set the machine on a level surface and remove the oil plug.
3c. The top surface of the oil must be seen just below the lower rim of
the hole for oil plug. Replenish as necessary.
NOTICE:
may result in poor or irregular vibration.
First 20 Hours of Operation
1. Replace the Oil in the Ramming Cylinder
Every 50 Hours or Weekly
2. Check for loose Bolts and Nuts. Retighten if necessary.
Every 200 Hours.
Fuel and Lubricant
Fuel
Model
Type of Oil
RTX 50
RTX 60
Unleaded
Petrol
RTX 68
RTX 70
RTX 80D
Diesel
Service & Maintenance
Capacity
Type Of Oil
2.5 Litres
Red Dot indicates
Minimum Oil Level
Engine Crankcase
Engine
Capacity
0.6 Litres
L48
0.8
25
Ramming Cylinder
Type of Oil
Litres
GB
Capacity
0.7 Litres
0.8
Litres

Publicidad

loading