Milwaukee M12 CLL4P Manual Original página 9

WORKING IN MANUAL MODE
In manual mode the cross lasers self-leveling mechanism is disabled and the laser lines can be set at
any slope required.
1
Place the cross laser on a solid flat
vibration free surface or on a tripod.
2
Turn the rotation dial to:
position.
Same as in the self-leveling mode,
but the laser beams are
interrupted every 8 seconds.
8 sec. 8 sec. 8 sec.
ENGLISH
3
Choose the beams that you want to
work with by pushing operation push
button
Tilt the laser using a tripod and adjust
to the desired angle and height.
4
To turn the Manual mode off,
turn the rotation dial to: .
or
turn the rotation dial to:
8