Milwaukee M12 CLL4P Manual Original página 8

WORKING IN SELF-LEVELING MODE
In self-leveling mode the cross laser will level itself in a ± 4° range and can project a horizontal beam and
horizontal points, a vertical beam line and plumb points or a both beams together with plumb points and
horizontal points
1
Place the cross laser on a solid flat
vibration free surface or on a tripod.
2
Turn the rotation dial to:
position
The cross laser can generate
2 laser beams and 4 laser points.
(A) horizontal beam forward
(B) vertical beam forward
(C) plumb points
(D) horizontal points
The cross laser will generate
forward cross beams including
4 laser points when all beams are
activated.
ENGLISH
1/4" male thread
5/8" male thread
C
B
A
D
C
3
Choose the beams that you want to
work with by pushing the MODE
button
If the initial level of the cross laser
is beyond ± 4° and the self-leveling
mode is activated, the laser beams
will flash
In this case reposition the cross
laser.
D
4
Before moving the cross laser, turn
the rotation dial to: .
This will lock the pendulum and
protect your cross laser.
> 4°
> 4°
7