Hitachi SPX-WKT2 Manual Del Usuario página 15

5.5 LEAVE HOME OPERATION ("Functions" menu)
Prevent the room temperature from falling too much when no
one is at home. The initial setting temperature is 10°C and the
temperature range can be set between 10°C and 16°C.
This operation is able to operate by "Continuous operation" or
"Day timer operation". Please use "Day timer operation" to set
the number of days up to 99 days.
5.5.1 Continuous operation
1 During stop or operation, select "Leave Home" from the
menu and press "OK".
The screen of "Set Period ?" selection will be displayed.
2 Select "No" in the continuous operation and press "OK".
The confirmation screen will be displayed.
3 Select "Yes" by pressing "" or "" and press "OK".
The leave home operation will be started and the screen will
return to the normal mode. (Leave home operation display)
4 Set the temperature by pressing "" or "".
Temperature range can be set between 10°C and 16°C.
Keep pressing and the value will change more quickly.
5.5.2 Day timer operation
1 During stop or operation, select "Leave Home" from the
menu and press "OK".
The screen of "Set Period ?" selection will be displayed.
2 Select "Yes" in the day timer operation by pressing "" and
select "Nb of days ?" by pressing "".
Set number of days (1 to 99 days) by pressing "" or "" and
press "OK". The confirmation screen will be displayed.
NOTE
• If the present time has not been set yet, automatically
"Adjusting Date/Time" will be displayed.
• In this case, " " is indicated on LCD of the normal mode.
• Refer to "Adjusting Date/Time" section of this manual.
3 Select "Yes" by pressing "" or "" and press "OK".
The leave home operation will be started and the screen will
return to the normal mode. (Leave home operation display)
"
timer operation is activated.
NOTE
• The timer is controlled by this remote controller.
• The timer lamp of indoor unit does not turn on.
• Number of day is counted when clock indicates 0:00.
- 15 -
" will be indicated when the day