Stihl BR 500 Manual De Instrucciones página 19

Turn the cap counterclockwise
N
(approx. 1/4 turn).
Remove fuel filler cap.
N
Refueling
Take care not to spill fuel while fueling,
and do not overfill the tank.
Closing the toolless filler cap
With grip in an upright position:
BR 500, BR 550, BR 600
Insert the cap – the raised
N
positioning marks on the cap and
the fuel tank opening must line up.
The cap should drop fully into the
N
opening in this position. Make sure
tank is not overfilled.
While pressing the cap down firmly,
N
twist it clockwise as far as it will go
(approx. 1/4 turn).
Fold down the grip.
N
Checking for proper closure
The lug on the grip must engage
N
entirely in the recess (arrow), and
the grip must lie completely flush
with the top of the cap.
Grip the cap and check for
N
tightness.
If the cap can be moved, it is not
N
properly installed.
If the cap does not tighten properly,
N
the cap parts may be misaligned
with each other, or the cap may be
damaged or broken. See the
"Fueling Instructions" section of the
Safety Precautions for how to
correct a misaligned cap and
additional information. Never use
your machine with a misaligned,
damaged or broken cap.
English
17