Assembling The Unit - Stihl BR 500 Manual De Instrucciones

For maintenance items please also refer
to the maintenance chart in this
instruction manual.
Store the power tool in a dry and high or
locked location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the machine" in this
instruction manual.
Store fuel in an approved and properly
labeled safety-type canister only. Take
care when handling gasoline! For health
and safety reasons, avoid direct contact
with the skin and avoid inhaling fuel
vapor!
BR 500, BR 550, BR 600

Assembling the Unit

Mounting the Control Handle
1
2
Pull the two halves of the clamp
N
apart.
Push the control handle (1) onto the
N
blower tube (2).
1
2
3
Line up the control handle (1) with
N
the tube's seam – as shown.
Secure the control handle (1) with
N
the screw (3) so that it can still be
moved on the blower tube (2).
Mounting the Blower Tubes
BR 500
1
2 3
Depending on your size and reach:
N
Push blower tube (1) up to the
appropriate mark on the blower
tube (2).
Rotate the blower tube (1) in the
N
direction of the arrow and engage it
in the appropriate slot (3).
BR 550, BR 600
2
3
Depending on your size and reach:
N
Push blower tube (1) up to the
appropriate mark on the blower
tube (2).
Rotate the blower tube (1) in the
N
direction of the arrow and engage it
in the appropriate slot (3).
English
1
11