Replacing The Plug Fuse (12/24 V); Replacing The Light Bulb - Dometic WAECO CoolFreeze CF-35 Instrucciones De Uso

_CF-35_60.book Seite 38 Montag, 19. Dezember 2011 8:26 20
Operation
6.10

Replacing the plug fuse (12/24 V)

➤ Pull the adapter sleeve (fig. 7 4, page 5) off of the plug.
➤ Unscrew the screw (fig. 7 5, page 5) out of the upper half of
the housing (fig. 7 1, page 5).
➤ Carefully raise the upper half of the housing from the lower
(fig. 7 6, page 5) half.
➤ Take out the contact pin (fig. 7 3, page 5).
➤ Replace the defective fuse (fig. 7 2, page 5) with a new one
that has the same rating (8A 32V).
➤ Re-assemble the plug in the reverse order.
6.11

Replacing the light bulb

➤ Press the switch pin (fig. 8 2, page 5) downwards so that the
transparent part (fig. 8 1, page 5) of the lamp can be removed
at the front.
➤ Replace the light bulb.
Note
I
The LEDs in the light bulb must be aligned with the transparent part
of the lamp.
➤ Press the transparent part of the lamp back into the housing.
38