Zeiss Victory RF Serie Modo De Empleo página 29

Instructions for use
Further information and assistance on this topic
can be found on our website http://www.zeiss.de/sportsoptics
First select the appropriate table for you, depending on the riflescope target
shot range:
Target shot range
100 metres
SID/GEE (corresponds to approx. 4 cm high shot at 100 metres)
100 yards
200 yards
Next, in accordance with the bullet drop of the load used, select the row of the
applicable table in which the values match most closely.
Tip: If you know the bullet drop for 300 metres/yards, simply select the most
appropriate curve from this column only.
Example:
The riflescope is sighted in at SID/GEE and the ammunition being used is
RWS 7x57. According to the manufacturer's specifications, the point of impact
(bullet drop) is – 42.0 cm at 300 m.
Therefore, Table 2 is used. In the "300 metres" column, the value of – 45.2 fits
most closely with the actual bullet drop. Thus, curve EU
the product.
Table 1: Selection of the trajectory path for range specifications in metres and
a sight in distance of 100 metres.
Curve Range
selection in metres
EU 1
EU 2
Bullet
EU 3
drop
EU 4
in cm
EU 5
EU 6
26
100 150 200
0 – 2.1 – 7.7 – 17.1 – 31.2 – 50.5 – 75.3 – 146
0 – 2.9 – 10.0 – 22.1 – 39.7 – 63.1 – 94.6 – 184
0 – 4.0 – 13.1 – 27.5 – 47.6 – 74.0 – 108
0 – 5.3 – 16.3 – 33.2 – 57.2 – 89.4 – 130
0 – 6.2 – 18.0 – 38.9 – 67.3 – 105 – 151
0 – 8.1 – 25.0 – 51.7 – 91.4 – 146 – 218
4 should be set on
▫
250 300 350
Table to be used
Table 1
Table 2
Table 3
Table 4
400 500
– 203
– 239
– 276
– 426