Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
careful when the tool is not in use or when
carrying it at your side.
VARIABLE-SPEED TRIGGER SWITCH
Your tool is equipped with a variable-speed
trigger switch. The tool can be turned "ON"
or "OFF" by depressing or releasing the
variable-speed trigger switch. The variable-
speed trigger switch delivers higher speed with
increased trigger pressure and lower speed with
decreased trigger pressure.
LOCK-ON BUTTON
Your tool is equipped with a lock-on button, lock
the switch in the ON position for continuous
operation.
Switch on:
Depress and hold down the trigger switch, then
press the lock-on button to lock the trigger
switch. The tool will continue to run (Fig. 11).
Switch off:
Squeeze and release the variable-speed trigger
switch once.
Before using the tool each time, be sure that the
lock-on button release mechanism is working
properly.
WARNING
removing the battery from the tool. Failure to
do so will cause the tool to start immediately
the next time the battery is installed.
Damage or injury could result.
OPERATION INSTRUCTIONS
Battery tools are always in
operating condition. Be
(FIG. 10)
Be sure to release the
locking mechanism before
Fig. 10
Fig. 11
-12-
2
1
Publicidad
