Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY RULES SPECIFIC FOR SCREWDRIVERS
Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring. Fasteners contacting a "live" wire may
make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
Hold the electric power tool securely. When
tightening and loosening screws, high reaction
torques may occur briefly.
Secure the workpiece. A workpiece is held
more securely in a clamping device or vice than
by hand.
Wait until the electric power tool has come
to a standstill before putting it down. The
insertion tool may jam and cause you to lose
control of the electric power tool.
Wear suitable clothing. Do not wear any
loose clothing or jewelry. Keep hair, clothing
and gloves away from moving parts. Loose
clothing, jewelry or long hair may become
caught in moving parts.
Do not point the electric power tool at
yourself or at other people nearby.
WARNING
Some dust created by power sanding, sawing,
•
grinding, drilling and other construction
activities contains chemicals known to the
State of California to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:
Lead from lead-based paints.
–
Crystalline silica from bricks, cement, and
–
other masonry products.
Arsenic and chromium from chemically-treated
–
lumber.
Your risk from these exposures varies,
•
depending upon how often you do this type
of work. To reduce your exposure to these
chemicals:
Work in a well-ventilated area.
–
Work with approved safety equipment, such
–
as dust masks that are specially designed to
filter out microscopic particles.
Avoid prolonged contact with dust from power
–
sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing
and wash exposed areas with soap and water.
Allowing dust to get into your mouth or eyes or
to lie on the skin may promote absorption of
harmful chemicals.
-5-
Publicidad
