Flex FX1611 Manual Del Operador página 9

WARNING
making any assembly, adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
TO ATTACH/DETACH BATTERY PACK (FIG. 2)
Lock the variable-speed trigger switch "OFF"
on the tool by placing the direction-of-rotation
(forward/center-lock/reverse) selector in the
center position before attaching or detaching
the battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack
onto the tool, be sure that the raised rib
on the battery pack aligns with the groove
inside the tool and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
REMOVABLE BELT CLIP AND BIT CLIP
(FIG. 3 & 4)
Your tool is equipped with a removable belt clip
that can be positioned on the left or right side of
the tool for convenient transport.
Install the belt clip onto the tool:
a. Remove the battery pack from the tool.
b. Align the rib of the belt clip with the threaded
hole on the base of the tool.
c. Insert the screw and securely tighten the
screw with a screwdriver.
Remove the belt clip from the tool:
a. Remove the battery pack from the tool.
b. Use a screwdriver to loosen the screw that
attaches the belt clip to the tool.
c. Remove the screw and the belt clip.
NOTICE: Your tool is also equipped with a
removable bit clip that can be positioned on the
left or right side of the tool for storing bits. The
installation method is the same as for the belt
clip (Fig. 4)
Detach the battery pack
from the tool before
ASSEMBLY
Fig. 2
Battery-release
Button
To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
Fig. 3
Fig. 4
-9-
Attach
Belt Clip
Bit Clip
Detach