Publicidad
Idiomas disponibles
Idiomas disponibles
2) To reset a wash cycle, turn the knob "Clockwise" to your desired wash cycle
setting.
3) Press "POWER" button again to the "ON" position to turn the dishwasher on.
You will hear a "Click" that signifies the automatic start of the wash process. You
will also notice that power indicator display light turns on.
Pausing a Wash Cycle:
The "POWER" button serves the purpose of the "Pause" function as well as
powering the machine on or off.
If you need to pause in the middle of the cycle to add or remove any items, follow
the steps below:
1) Press "POWER" button to the "OFF" position to pause the cycle. You will notice
that the power indicator display light shuts off.
2) Open the door by squeezing the door latch slowly.
Note: Do not open the door until the water spray action stops. Be careful of
moist hot air that may rise out of the dishwasher.
3) Add or remove items. Once you have finished adding or removing, simply close
the door properly.
4) Press the "POWER" button to the "ON" position to resume the cycle. You will
notice that power indicator display light turns on.
Open Door Protection:
Your dishwasher will stop automatically if the door is opened during the operation.
The dishwasher will not start until the door is closed again. Once the door is closed
the cycle will resume automatically.
English
10
Publicidad
