Haier HAMTSJP86MC/1 Manual De Instrucciones página 19

3.3.9 Timer control
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set
time is up.
• You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99min.
a) Using the Timer as a Minute Minder
Make sure the cooktop is turned on.
Touch "+" the controls of the timer. The minder
indicator will start flashing and "00" will show in
the timer display. Then select and activate a one
touching the heating one slider control.
Set the time by touching the "-" or "+" control of
the timer
Hint: Touch the "-" or "+" control of the timer once
to decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer to
decrease or increase by 10 minutes.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- - " when the setting time finished.
b) Setting the timer to turn one or more cooking zones off
Touching the heating zone slider control
Set the time by touching the "+" or "-" control of
the timer
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+"control of the
timer will decrease or increase by 10 minutes.
Set one zone
EN-18