+GF+ SPC D/PID Manual De Instrucciones página 34

Type SPC D/PID positioner
CLOCK
12:00
00
Thu. 01 . 09 . 11
MENU INPUT
INPUT X.TUNE
X.TUNE
MENU RUN
CLOCK
CMD/POS
-
-
0.0
CMD
0.0
POS
MENU POS MANU
X.TUNE
6.6 Master code
The operation of the device can be locked via a freely selectable user code. Independently of this, there is a
master code which cannot be changed and with which you can perform all operating actions on the device.
6.7 Operating levels
For the operation and setting of the SPC positioner type there is the process level and the setting level.
Process level:
In this level the running process is displayed and operated.
Operating state:
AUTOMATIC Displaying the process data
MANUAL
Setting level:
The basic settings for the process are made at
this level.
Entering the operating parameters
•
Activation of additional functions
•
NOTE!
If the device is in the operating state when changing to the setting level
AUTOMATIC, the process continues during the
setting.
34
Time, day of the week and date
Automatic adjustment of the positioner (positioner)
Automatic optimization of the process controller parameters
Automatic linearization of the process characteristics
Simultaneous display of the setpoint position and the actual position
of the valve actuator (0 to 100%)
Manual opening and closing of the valve
Operating Instructions
CLOCK
12:00
00
Thu. 01 . 09 . 11
MENU INPUT
X.TUNE
POS (t)
X.TUNE
MENU P.TUNERUN
CLOCK
P.TUNE
MENU P.LIN RUN
X.TUNE
P.LIN
MENU RUN
P.TUNE
CMD/POS
0.0
CMD
POS 0.0
MENU P.LIN SP/PV MANU