+GF+ SPC Manual De Instrucciones página 27

Operating Instructions
5.3.1 Valve mode + warnings (factory setting)
Valve position: open, intermediate, closed
•
Device status: Failure, Function check, Out of specification, Maintenance required (according to NAMUR)
•
Valve position
Open
in between
Closed
NOTE!
If several device statuses are present at the same time, the device status of the highest priority is displayed.
Valve Device status
position
Interruption
Status
Color
Open flashes red
in flashes red
between
Closed flashes red
* Factory setting, selectable colors for valve position: off, white, green, blue, yellow, orange, red
For warning messages, the LEDs are briefly off between color changes.
When localized, the colors are shown flashing only.
Status, color
lights up yellow*
lights up white* **
lights up green*
Function control
Status
Color
flashes
orange
flashes
orange
flashes
orange
Device status
Normal mode
--
--
--
Out of specification Service require-
ments
Status Status
Color Color
flashes yellow flashes
blue
flashes yellow flashes
blue
flashes yellow flashes
blue
Type SPC positioner
alternating
with yellow*
alternating
with yellow* **
alternating
with yellow*
27