geberit ESG LIGHT Manual De Operación página 23

1
Connect the electrofusion machine to
the supply voltage.
✓ Mains connection LED display
lights up.
2
Connect the connecting cable for
electrofusion coupling to the
electrofusion sleeve coupling or the
electrofusion tape for anchor point.
✓ Ready for welding LED display
lights up.
63050397048849803 © 02-2023
967.779.00.0(02)
3
Press the start button.
✓ Welding procedure LED display
lights up and the Ready for
welding LED display
4
After approx. 80 seconds, the
welding is complete and the sleeve
connection plug can be unplugged.
✓ Welding procedure LED display
goes out and the Welding
complete LED display
up.
Result
✓ Welding has been performed correctly.
EN
goes out.
lights
23