Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly instructions
Step 13
Important: Study and follow the diagram carefully.
Feed the loop end of 2930mm Lower cable (43) through opening in the Leg developer (15). Insert Pulley
bushing (37) into holes and attach 1
(63)
X1.
Repeat procedure for 2
and Front support (5).
Pulley (33) under the cable assembly to the other end of the Angled double pulley bracket (11)
Place 4
th
using M10 bolt (50)
X1.
X1.
Place 5
Pulley on the cable and attach to Base frame (1) using M10 bolt (53)
th
and M10Nut ( 63 )
X1.
X1.
Attach the loop end of the Lower cable (43) to the M10 Bolt (53) with M10 Washer (61)
and M10 Nut (63)
X1.
X1.
Pulley (33) using M10 bolt (50)
st
nd
and 3
rd
Pulley's, feeding cable through opening's in the Leg developer holder (15)
M10 Washer (61)
X2.
X1.
and M10 Nut (63)
X1.
X1.
2 0
M10 Washer
(61)
and M10 Nut
M10 Washer (61)
X1.
X1.
X2.
X2.
Publicidad
