Publicidad
Idiomas disponibles
Idiomas disponibles
2. Continuous operation mode
Under this mode, the LCD indicates elapsed time and current running time as display be-
low:
3. Timed Setting mode:
Set the time by pressing the increase or decrease timer buttons, each press will adjust the
timer upwards or downwards by 10 minutes . When setting finished, wait for 20seconds it
will start to count the time automatically. The concentrator will stop working, till the time
runs out.
4. Oxygen Parameters Display
At rated flow, stated concentration should be achieved after initial warm-up period (less
than 30 minutes). High O2 purity, Low O2 purity, display as below:
If oxygen purity is higher than 85%, the high O2 purity bar will be shown, and the con-
centration level is shown.
15/193
EN
Publicidad
