SICK PowerProx WTT12L Instrucciones De Uso página 26

OPERATING INSTRUCTIONS
7 Configuration
7.1 Adjustment
en
26 O P E R A T I N G I N S T R U C T I O N S | PowerProx - WTT12L
Sensor with potentiometer:
The sensing range is adjusted with the potentiometer (type: 4 rotations). Clockwise
rotation: Sensing range increased; counterclockwise rotation: Sensing range reduced.
We recommend placing the object within the sensing range, e.g. see
sensing range has been adjusted, the object is removed from the path of the beam,
which causes the background to be suppressed. The digital output changes
Sensor with teach-in button:
The sensing range is adjusted by pressing the teach-in button. Do not operate the
teach-in button using sharp objects. We recommend placing the object within the
sensing range, e.g. see figure
is removed from the path of the beam, which causes the background to be suppressed.
The digital output changes
Refer to the enclosed "IO-Link photoelectric sensors" operating instructions for informa‐
tion about adjusting the IO-Link sensing range.
The sensor is adjusted and ready for operation. Refer to
the function. If the digital output fails to behave as described in
application conditions. see "Troubleshooting", page 27
Figure 7: Switching behavior
3. Once the sensing range has been adjusted, the object
(figure 7).
figure 3. Once the
(figure
figure 7 and figure 3 to check
figure 7, check the
8018110.1K5W/2023/07/10 | SICK
Subject to change without notice
7).