Publicidad
Idiomas disponibles
Idiomas disponibles
EN
5.1.2 CLEAN THE SPRAY TIP
1.
Use a straight paper clip or cleaning tool (20) to
clean the spray tip.
2.
Flush and clean the unwanted materials out of
the spray tip (18) with the garden hose (17).
3.
Install the clean spray tip (18) back into the spray
wand (4).
18
②
①
6
TRANSPORTATION AND STORAGE
Disconnect the power cord and water supply hose
before transportation and storage.
6.1
MOVE THE MACHINE
• Point the spray wand in a safe direction.
• Only hold the machine with the handgrip.
6.2
STORE THE MACHINE
Make sure that the spray gun, the high pressure
hose and the machine are dry.
Make sure the machine is out of the reach of
children.
• Disconnect the garden hose from machine.
• Wind the power cord and the high-pressure hose.
20
18
19
③
Click
WARNING
WARNING
WARNING
English
• Clean housing and the plastic components with a
moist and soft cloth.
• Make sure that the machine does not have loose or
damaged parts. If it is necessary, follow these steps/
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• If needed, call the customer service phone
number for servicing instructions.
• Store the machine in a dry, isolated and frost-free
area.
7
TROUBLESHOOTING
PROBLEM
The motor does
not start.
12
POSSIBLE
SOLUTION
CAUSE
The power but-
Set the power
ton is in the
switch to the
"OFF" (O) posi-
"ON" ( | ) posi-
tion.
tion.
The power cord
Connect the
is not plugged
power cord to
in.
the power sup-
ply.
Electrical outlet
Try another
does not supply
electrical outlet.
sufficient power.
The circuit
Let it cool, and
breaker is trip-
start the ma-
ped.
chine again.
The power
Pull the spray
switch is on, but
gun trigger.
you do not pull
the spray gun
trigger.
Publicidad
