Publicidad
Idiomas disponibles
Idiomas disponibles
˜ Changing rotary direction
Push through the rotation direction switch
direction (Fig . C):
Switch pushed from
Right
(b)
Left
(a)
˜ Safety lock
Set the rotation direction switch
protrudes equally on both sides . The switch trigger
pressed in this setting .
˜ Changing bits and magnetic bit holder
Pull out the bit
1 ]
[
holder
or the magnetic bit holder
NOTE: Screw bits are labelled according to their dimensions
and their shape . If you are unsure, always try the particular
screw bit out to see whether it sits in the screw head without any
free play .
164 GB/MT
Direction
Tighten
screws
Loosen
screws
5 ]
[
11 ]
[
. Insert another type of bit into the bit
[
5 ]
to set the rotary
Direction indicator
to the middle position so that it
7 ]
[
10 ]
[
(Fig . D) .
[
2 ]
4 ]
[
cannot be
Publicidad
