SCHUBERTH C5 Carbon Manual página 44

3. After cleaning, attach the ventilation hood
by placing it on the bracket and pushing it
forward under slight pressure until it clicks
into place
4. To ensure optimum ventilation, operate the
ventilation slide.
6. RETENTION SYSTEM
The components of the retention system do not require maintenance. You
should, however, regularly inspect the retention system for damage.
7. STORING THE HELMET
Store the helmet in the helmet bag supplied in a dry, well-ventilated and stable
place. Always position the helmet so that it cannot fall to the floor. Damage that
occurs in this way is not covered by the warranty.
Note:
Store the helmet out of the reach of children and animals.
44