Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for using the Pre-Set Program Buttons
The following is the basic settings of the six Pre-Set buttons for The Quiet One®. These programs, numbered 1 through 6, are blending cycles designed for the most commonly made
drinks. Depending on the viscosity of the drink you are creating, selecting one of the Pre-Set programs will run the machine for a full cycle. The machine will stop by itself when the
cycle is complete. A cycle varies in speed and length. Your machine's Pre-Set options may differ due to program revisions or due to the difference of recipes, your results may also vary.
BUTTON 1: General Purpose / Smoothie – blends smoothies and thin drinks consisting of juice and ice to a creamy consistency. (:18)
BUTTON 2: Double Smoothie – blends similar drinks to that of button 1 but at larger volumes. (:18)
BUTTON 3: Frozen Coffee and Juices – blends light coffee drinks to a creamy consistency. (:18)
BUTTON 4: Ice Cream Drinks – blends drinks containing hard ice cream to a thick shake consistency. (:28)
BUTTON 5: Double and hard-to-blend ice cream drinks. (:20)
BUTTON 6: Thick Hard-to-blend Smoothie – blends thick frozen fruit & hard ingredients for a thick but consistent smoothie. (:28)
Blending Tips
1.
Place liquids and soft foods in the container first, solid items and ice last. Although not necessary for processing, you may want to cut or break food into smaller pieces
for more precise measuring of ingredients. Thawed or partially thawed fruit is recommended.
2.
As a general rule, compared to other blenders, you do not need as much ice to make an equally frozen drink in The Quiet One®. If your recipe freezes up, try reducing
the amount of ice.
3.
Set the container on the motor base by aligning it over the centering pad anchored to the base. (Motor must be completely stopped before positioning container.)
Containers are not to be used for hard, dry materials. Avoid running your machine with the container empty.
4.
Always use a lid that is securely attached when blending.
5.
Plug the machine into the nearest outlet (if unplugged). Press the On/Off switch to on. Select desired programmed setting by pressing any of the Pre-Set buttons 1
through 6. The machine will immediately begin to cycle through the selected program and turn off when the program is complete. (NOTE: Each button has a different
pre-selected combination of speed and length for blending.)
6.
Once one of the six Pre-Set program buttons is pushed, the machine will start and stop automatically. By pressing another Pre-Set button, the machine will stop the blending cycle.
When the cycle is complete, the blender stops. Wait until blades come to a complete stop before removing the lid and/or container from the motor base.
7.
8.
Remove the container, pour, garnish and serve the drink.
9.
Press the On/Off power switch to off when not in use.
Maintenance Tips
•
Never bang the container against a surface to loosen the ingredients. Remove the container from the base and use a rubber spatula to remove thick mixtures from the bottom of
your container.
• Never shake or rattle a container while in use.
• Never remove the container before the machine has come to a complete stop.
• Never start the motor before the container is in place.
IMPORTANT NOTES!
• Check your blades daily for loose, nicked or missing parts. If you find something is loose, nicked or missing, replace the blade assembly before use. Do not tighten hex-headed
screw (on top of blade assembly). If loose, replace blade assembly immediately.
• The instructions appearing in this Use and Care Manual cannot cover every possible condition and situation that may occur. Common sense and caution must be practiced
when operating and maintaining any appliance.
• When the thermal protector shuts the motor off, review your processing techniques and your instructions. Your recipes may be too thick or have too much material in them. Consider
adding more liquid and consult Vitamix® Customer Service or your local Vitamix Distributor for further assistance.
g
i
e n e R a l
n S t R u c t i o n S
5
Publicidad
