Publicidad
Idiomas disponibles
Idiomas disponibles
USE
USE
To confirm, briefly press the
To confirm, briefly press the
simultaneously.
simultaneously.
- At any other time, if your table is in standby
- At any other time, if your table is in standby
mode (with or without residual heat), press and
mode (with or without residual heat), press and
hold the and
hold the and
simultaneously to change the power level.
simultaneously to change the power level.
Available power levels:
Available power levels:
Table power
Fuses /
kW
Circuit breaker (A)
7,4
32
4,6
20
3,6
13
3
13
SWITCHING ON - STOPPING
Switching on:
Press the
button and then the
corresponding to the desired zone.
A 0 is displayed and a beep indicates that the
zone is on. You can set the desired power of
the selected cooking zone. If no power is re-
quested, the cooking zone will be switched off
automatically.
Stopping a zone:
Press and hold the
heat source.
and
and
keys
keys
button
button for the desired
A long beep sounds and the display goes out or
the "H" symbol (residual heat) appears.
General shutdown:
Press and hold the
beep sounds and the display goes out or the
symbol "H" (residual heat) appears.
+ / - Power setting
When switching on, you can switch directly to
power level 14 by pressing the - button. Press the
+ or - button to set the power level from 1 to 14.
With a power < 6, a quick double press on the +
button allows access to power 6.
With a power level between 6 and <10, a quick
double press on the + button allows access to
power level 10.
With a power between 10 and <14, a quick
double press on the + key will access power 14.
Press the button
power.
on/off button . A long
X2
X2
X2
to access the maximum
EN
11
Publicidad
