Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions
Secure refrigerator to furniture
Whenever possible, perform this step for anti-tip security.
Drive Screws Through
Case Trim Into Adjacent
Cabinets.
Connect water supply
Ferrule
Compression Nut
24
English
TBI_Dacor_Installation_DA68-03583B-00_EN.indd 24
Raise Grille Panel
to Stop Position.
Compression Nut
Sleeve
Compression fitting
The refrigerator must be secured to
prevent tipping.
• Raise the grille panel to access case
trim.
• Drive a screw through the trim and into
the adjacent FURNITURE using holes
provided.
• Follow the same procedure on the
opposite side.
Connect a hose from refrigerator and
water line, installed to water pipe like
above figure.
• Turn on the water to check for leaks.
NOTE
Make sure excess tubing length does not
interfere with kickplate installation.
2022-11-18
6:16:10
Publicidad
