Descargar Imprimir esta página

Fagor 3VFT-33AC Manual De Instrucciones página 39

Placa vitrocerámica

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
Automatic warm-up function
Each cooking zone is equipped with an au-
tomatic warm-up function. When this is acti-
vated, then the given cooking zone is switched
on at full power for a time depending on the
heat setting selected, and is then switched
back to the heat setting originally set.
To use the automatic warm-up function touch
(-)(4) set the heat setting of "9" (3) and then
touch (+) (5) so that "A" is displayed and then
use (-)(4) to set the desired heat setting. A dot
displayed in the lower right corner of a cook-
ing zone display (3) indicates that automatic
warm-up function is active.
If you start to select the heat setting within 10
seconds by touching the (-)(4) sensor, then
the automatic warm-up function is activated
and the dot remains lit for as long as it stays
activated.
The cooking heat setting can be now changed
at any moment using the method described
above in the "Set the heating power" section.
If you do not start to select the heat setting within 10 seconds, then the dot
turns off and the automatic warm-up function is inactive.
If you do not wish the automatic warm-up function to operate, start selecting
the heat setting by touching the (+)(5) sensor field.
3
3
4
The heat setting
1
2
3
4
5
6
7
8
9
8
3
Fast cooking time
[min]
1'11"
2'44"
4'47"
5'28"
6'29"
1'11"
2'44"
2'44"
-
39

Publicidad

loading

Este manual también es adecuado para:

Io-hob-09863vft-33ac 8506554