Erreka IZAR IZ1C Manual Del Instalador página 24

GENERAL SAFETY INSTRUCTIONS
The device can be used by children aged 8 and
over and by persons with impaired physical,
sensory or mental capacities, or people who
have insufficient experience or knowledge,
provided they have been suitably supervised
and trained.
Children must not be allowed to play with the
device.
The device must not be cleaned or maintained
by children unless supervised.
A means of disconnection must be fitted for
t h e f i x e d i n s t a l l a t i o n , w i t h a c o n t a c t
separation in all poles that allows complete
disconnection under overvoltage category III,
in accordance with installation regulations. Its
specific characteristics (rated current, voltage,
etc.) must be suitable for the facility and the
elements used.
The device must be attached to its support as
described in the "Installation" section of this
guide.
The device's trade name is shown on the cover
of this guide. The manufacturer's full address
is shown on the back cover of this guide.
The operator type or model reference is
shown in the "Operator features" section of
this guide.
Proper use of the device is set out under
"Envisaged use". Any use other than that
described in the guide is considered improper
and forbidden, as it could result in injury and
damage to property.
The name of the operator is shown in the
"Operator features" section of this guide.
WARNING: Important safety instructions.
Follow all instructions, as improper installation
can result in serious injury.
The device weighs less than 20 kg, meaning
handling equipment is not required.
24
Installation Manual
WARNINGS
WARNING: Important safety instructions.
These instructions must be followed in order
to guarantee the safety of people. Keep these
instructions in a safe place.
W A R N I N G : T h e o p e r a t o r s h o u l d b e
disconnected from its power source during
cleaning, maintenance, and when replacing
parts.
Do not allow children to play with the device
or its controls, including remote controls.
The explanation for the mode indicators is
s h o w n i n t h e r e l e v a n t s e c t i o n o f t h e
instructions manual for the ERREKA control
panel used.
Details on how to use any manual release
device, or a reversible operator used as a
manual release device, are shown in the
"Manual drive" section of this guide.
Keep people away from the facility while the
hold-down switch is operating.
The user must NOT readjust the controls; this
must be left to a qualified professional.
Frequently inspect the facility for any
imbalance or signs of wear or deterioration of
the cables, springs and assembly. Do not use
the device if any repairs or adjustments are
required.
The A-weighted emission sound pressure level
of the operator is equal to or less than 70
dB(A): LpA <=70dB(A).
WARNINGS FOR INSTALLATION
The required installation components are
shown in the "Elements of the complete
installation" section. Details and instructions
for all the components can be found at the
website www.erreka-automation.com.