cecotec bolero DRESSCODE 7300 Inverter A Manual De Instrucciones página 10

turn off the water tap. Do not operate the washer before
the hoses have been properly installed.
- Do not remove the filter from the drain pump while there is
water left in the machine. Hot water spillage may occur.
- Before carrying out any maintenance in the device, unplug
the appliance from the mains.
- As a safety measure, we advise you to unplug the appliance
and cut the water supply after every use. Maximum water-
inlet pressure: 1 MPa. Minimum water-inlet pressure: 0.05
MPa.
- Use the new hoses supplied with the equipment.
- Never unplug the appliance with wet hands.
- Unplug the power cord before cleaning or repairing the
product.
- For safety reasons, the appliance must be properly earthed.
- Water channelling and electrical devices must be
connected by a qualified technician in accordance with
the local and national safety regulations specified by the
manufacturer.
- The glass door may reach high temperatures during
operation. Keep children and pets away from the glass
door.
- Do not use the device in rooms where water, moisture,
explosives, or caustic gases are present.
- If the room where the washing machine is located has any
type of device that generates fumes from the burning of
fuels, make sure that there is proper ventilation, as the
accumulation of these fumes may cause a fire hazard.
- Do not wash items that have been soiled with substances
such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes, and wax removers.
- Items such as foam rubber, shower caps, waterproof
BOLERO DRESSCODE 7300/8300/9300/10300
10