cecotec bolero DRESSCODE 7300 Inverter A Manual De Instrucciones página 9

SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the device.
Keep this instruction manual for future reference or new
users.
- Ensure that the mains voltage matches the voltage
specified on the device rating label and that the plug is
earthed.
- The installation of an earthed socket must be carried out
by a qualified electrician. Make sure that the electrical
installation complies with current regulations.
- If the power cord is damaged, it must be replaced by the
official Cecotec Technical Support Service or by a similarly
qualified person to prevent hazards.
- If the product is damaged, it must not be used. Contact the
official Cecotec Technical Support Service. Risk of electric
shock!
- Do not use an extension cord or multiple sockets.
- Do not use external switching devices such as timers.
- This appliance is for indoor use only.
- Make sure the device is installed in places where the
temperature is above 5ºC. Lower temperatures may cause
damage to internal components. If the device should
freeze, be sure to drain the water completely to avoid
further damage.
- In case of leaks or splashes of water, dry the device as soon
as possible.
- The device is not designed for built-in installation.
- Use the hose set supplied with the appliance. Do not reuse
old hoses.
- Check the hose connections and the tap to avoid problems
due to pressure changes. If the connections loosen or leak,
BOLERO DRESSCODE 7300/8300/9300/10300
9