WIKA NS 160 Manual De Instrucciones página 4

1. General information
1. General information
The instrument described in the operating instructions has been designed and
„
manufactured using state-of-the-art technology. All components are subject
EN to stringent quality and environmental criteria during production. Our manage-
ment systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the
„
instrument. Working safely requires that all safety instructions and work
instructions are observed.
Observe the relevant local accident prevention regulations and general safety
„
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the
„
immediate vicinity of the instrument and readily accessible to skilled personnel
at any time.
Skilled personnel must have carefully read and understood the operating
„
instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using
„
the product contrary to its intended use, non-compliance with these opera-
ting instructions, assignment of insufficiently qualified skilled personnel or
unauthorised modifications to the instrument.
The general terms and conditions contained in the sales documentation shall
„
apply.
Subject to technical modifications.
„
Further information:
„
- Internet address:
Model
532.52, 532.53, 532.54, 533.52, 533.53, 533.54, 562.54, 563.54,
532.32, 532.33, 532.34, 533.32, 533.33, 533.34, 562.34, 563.34
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in
serious injury or death, if not avoided.
WARNING!
... indicates a potentially dangerous situation in the hazardous area
that results in serious injury or death, if not avoided.
Information
... points out useful tips, recommendations and information for
efficient and trouble-free operation.
4
All manuals and user guides at all-guidesbox.com
www.wika.de / www.wika.com
WIKA operating instructions pressure gauge model 5 per ATEX
Data sheet
PM 05.02