Serta Motion Essentials VI Manual Del Propietário página 11

syncing two bases (optional)
A sync cord is included with the base. Not available on Queen, Full or King/Cal King size bases.
The sync cord connects the two control boxes to a single remote for the synchronization of two bases.
STEP 1
Unplug bases from power source.
STEP 2
Unplug the USB Cord from the Multi-function port of each control box.
Then plug the male ends of the sync cord into the Multifunction port of
each control box. Now connect the USB Cords to the female ends of
the sync cord.
STEP 3
Plug bases back into the power source. The light under the bed
will begin to flash, indicating that it is in pairing mode.
Sync Cord
Control
Box 1
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
STEP 4
Press and hold down the PAIR button on the
back of the remote. The button will flash to
indicate the pairing is completed. The PAIR
button will stop flashing and the underbed light
will turn off. The remote control can now operate
the base normally.
Control
Box 2
PAIR
9