Publicidad
Idiomas disponibles
Idiomas disponibles
troubleshooting
If one or more functions on the bed base have stopped operating:
ADJUSTABLE BASE
•
Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of
the base.
•
Check to ensure the blue LED light is illuminated on the control box. If there is no light, verify that the input and power cords are properly
connected.
•
Unplug the base for 1 minute to reset the electronic components.
•
Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical surge protector is
recommended).
REMOTE CONTROL
•
Ensure that your remote batteries are properly installed or do not need replacing.
•
Ensure that the remote control is paired to the bed base.
If issue is not resolved by following the instructions above, locate serial number on warranty card or
back of remote and call Customer Service: 1-888-550-3746
13
Publicidad
