Serta Motion Essentials VI Manual Del Propietário página 12

remote control
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the
event that the remote is not paired with the base, follow the steps below.
REMOTE PAIRING
STEP 1
Unplug the Power Cord from your power outlet. Wait 1 minute, then plug it
back in to your power outlet. Perform Step 2 within 10 seconds, while the
control box light is flashing.
Power Supply
STEP 2
Remove the back cover on the remote. Press and hold
the PAIR button on the back of the remote. The PAIR
button will illuminate and start to flash. When the PAIR
button stops flashing, the LED light on the control box
will stop flashing. Release the PAIR button.
STEP 3
Test all remote functions. If the remote buttons do not impact the adjustable
base movements, please repeat the process again or call Ergomotion customer
service: 1-888-550-3746
10
Power Cord
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
CHILD LOCK
Activate Child Lock
Deactivate Child Lock
1
PAIR
2
To activate Child Lock, press and hold the
HEAD UP and FOOT UP buttons together for
3 seconds until the remote backlight flashes
twice.
The remote is now in Child Lock. Pressing any
buttons while in Child Lock will yield no
movement to your adjustable base.
Press and hold the HEAD DOWN and FOOT
DOWN buttons together for three (3) seconds,
then hold HEAD UP and FOOT UP for three
(3) seconds until the remote backlight flashes
twice.
The remote is no longer in Child Lock. The
remote and adjustable base will work normally.