STEINEL L 10 S Manual Del Usuario página 53

Twilight setting (G)
The response threshold (twilight) can be infinitely varied
from approx. 2 to 2,000 lux.
– = daylight mode (depending on ambient light level)
– = night-time operation (approx. 2 lux)
The control dial must be turned to
the detection zone and performing the functional test in
daylight.
Factory settings
– Twilight setting: daylight mode 2,000 lux
– Time setting: 5 seconds
Adjusting the L 10 S detection zone
To rule out inadvertent triggering or target specific danger
spots, the detection zone can be limited with lense plastic
covers. The lens plastic cover is installed in the design ring.
6.2
• Dismount design ring from the sensor unit.
when adjusting
– 23 –
GB
Index