Publicidad
Idiomas disponibles
Idiomas disponibles
18
INSTALLATION
NOTE
Collet
Tube
Insert Line
1) Gently insert the tube until only one
line shows on the tube.
(Correct)
(Incorrect)
2) Pull the tube to make sure that the
tube is tightly fastened.
Removing the CustomChill™ Drawer
NOTE
If moving the refrigerator through a narrow
opening, removing the CustomChill™
drawer handle is recommended rather than
disassembling the drawer.
If you need to remove the drawer, follow
these instructions very carefully.
Removing the drawer requires two people.
1
Pull the drawer open to full extension.
CAUTION
When the drawer is pulled completely free
of the rail stops, it can easily fall. To avoid
product damage and personal injury, either
find a way to support the drawer in this
position or have someone assist you while
following the next steps.
2
Lift the front of the drawer by the sides
and pull forward until the rollers have
passed the last rail stop and the basket has
cleared the compartment. Do not support
the drawer by the handle, which could
come off.
3rd stop
3rd stop
2nd stop
2nd stop
1st stop
1st stop
Publicidad
