Optional Accessories - Makita GA7060 Manual De Instrucciones

MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
► Fig.24
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-
-
NOTE: *1 Only for tools with M14 spindle thread.
NOTE: *2 Do not use Super flange and Ezynut together.
NOTE: *3 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *4 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
Wheel guard for depressed center grinding wheel / flap disc / wire wheel brush
Inner flange / Super flange *1*2
Depressed center grinding wheel / Flap disc
Wheel guard for abrasive cut off wheel / diamond wheel *3
Inner flange 78 (Australia and New Zealand only) *4
Abrasive cut-off wheel / Diamond wheel
Outer flange 78 (Australia and New Zealand only) *4
Air vent cleaning
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
► Fig.22: 1. Exhaust vent 2. Inhalation vent
NOTE: Do not loosen the screw on the name
plate cover. Otherwise the cover may be opened
accidentally.
► Fig.23: 1. Screw
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Side grip / Loop handle
Lock nut / Ezynut *1*2
Rubber pad
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Lock nut wrench
Dust cover attachment
13 ENGLISH