Installation requirements
If codes permit and a separate ground wire is used, it is recommended that a qualified
electrical installer determine that the ground path and the wire gauge are in accordance
with local codes.
Check with a qualified electrician if you are not sure the oven is properly grounded.
This oven must be connected to a grounded-metal permanent wiring system.
Be sure that the electrical connection and wire size are adequate and in conformance with
the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.
1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all local
codes and ordinances.
A copy of the above code standards can be obtained from:
•
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
•
CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575
14
English
NQ9300M_MOD_DOC30M977D_DE68-04479A-03_EN.indd 14
2019-09-20 PM 3:46:37