Important safety instructions
WARNING
•
The information in this manual should be followed exactly.
- A fire or electrical shock may result causing property damage, personal injury or
death.
•
Important - Save this installation manual for local electrical inspector's use.
•
Proper Installation - Be sure your appliance is properly installed and grounded by a
qualified technician.
•
New branch-circuit installations (1996 NEC), mobile homes, recreational vehicles,
or installations where local codes prohibit grounding through the neutral conductor
require 4-wire branch-circuit connection.
•
Improper connection of aluminum house wiring to copper leads can result in an
electrical hazard or fire. Use only connectors designed for joining copper to aluminum
and follow the manufacturer's recommended procedure closely.
•
Mounting screws must be used.
- Failure to do so can result in the oven falling out of the cabinet causing serious
injury.
CAUTION
•
Make sure the cabinets and wall coverings around the oven can withstand the
temperature (up to 194 °F [90 °C]) generated by the oven.
- Discoloration, delamination or melting may occur.
•
DO NOT remove spacers on the side walls of the built-in oven.
- These spacers center the oven in the space provided. The oven must be centered to
prevent excess heat buildup that may result in heat damage or fire.
6
English
NQ9300M_MOD_DOC30M977D_DE68-04479A-03_EN.indd 6
2019-09-20 PM 3:46:35